Replace non-adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to achieve ± 1.50 ° degrees of caster adjustment as well as front pinion angle change. Whether the truck is lifted or stock...

FOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non- adjustable two-bolt struts adjustable up to +-1.75deg camber change. Head marking show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set...

FOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up to +/- 1.75deg camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set...

FOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up to +/- 1.75deg camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set...

FOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up to +/- 1.75deg camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set...

FOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up to +/- 1.75deg camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set...

Make a two bolt strut adjustable up to +-1.75deg camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change. SPC's...

The 32120 set centers both Steer Axle wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. Simply slide the sleeves over the 22mm wheel studs and seat the face of...

The 32121 set centers both Steer Axle wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. Simply slide the sleeves over the 22mm wheel studs and seat the face of...

EZ ON Wheel & Brake Drum Centering Sleeves (6/pkg) centers both steer wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. The "threadless" sleeve design allows quick & easy centering...

A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment...

This wedge-type shim fits the 2 hole design of this platform between the rear spring and the axle to change pinion angle. Perfect to align the driveline on vehicles that have been lowered or lifted....

This great too is a must for your garage and can't be beat at the track. Portable, hands-free alignment can be done quickly and easily with the FasTrax Adjustable Camber/Caster Gauge. This tool will help...

Adjust rear camber on many non-adjustable Ford and Lincoln models with SPC's pantented EZ cam bolt. Simply replace the rear upper control arm to knuckle bolt with SPC's bolt and get +-0.75deg of camber adjustment...

The innovative cam nut and sturdy bracket saves time and money. Easily adjust camber and caster on newer F150s and Expeditions. Save time since you don't have to remove the OE bolt or stabilizer bar....

Drive up to +-2deg camber and caster change on the front of the Ranger, Explorer, Mountaineeer, and B-Series Pickup by replacing the stock bolt and locking plate with this cam bolt kit from SPC. The...

Use this kit to change caster and/or camber on these vehicles. Simply replace the existing upper control arm mounting bolts with these cam bolts for caster/camber changes up to +- 2.0deg. California Residents WARNINGInstallation InstructionsThis...

This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel. Single-unit design with no loose parts. California...

Replace damaged or corroded factory adjusters on the new Ford Rangers and Broncos with this replacement cam kit from SPC. This kit is designed to replace the factory adjusters on the front lower control arm...

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem...