Campers Available In-Stock and Ready for Same Day Pickup!
$28.82$31.13
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide...

$1.53$1.65
-7%
Ships from Manufacturer: • May have applicable lead time

Replacement Holdown Cup Spring for Wilwood’s internal Parking Brake kits and Brackets. Made from alloy steel and plated for corrosion resistance.

$1.26$1.37
-8%
Ships from Manufacturer: • May have applicable lead time

Replacement Holdown Cup for Wilwood’s internal Parking Brake kits and Brackets. Made from alloy steel and plated for corrosion resistance.

$5.22$5.64
-7%
Ships from Manufacturer: • May have applicable lead time

Spindle Bracket Bolt Sleeve. With a .437” ID, .479” OD and .388" length. Made from high strength steel alloy.

$0.68$0.74
-8%
Ships from Manufacturer: • May have applicable lead time

Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer are made from high strength aluminum alloy. Spacers widths will vary in application based on caliper....

$0.94$1.02
-8%
Ships from Manufacturer: • May have applicable lead time

Slide Pin Bolt Sleeve for many Wilwood Floating calipers. Fits D52 / D154 /DH /HM and HC calipers. Made from high strength steel alloy and plated for corrosion resistance

$9.56$10.32
-7%
Ships from Manufacturer: • May have applicable lead time

Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or...

$9.56$10.32
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers...

$9.56$10.32
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers...

$5.61$6.06
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4...

$5.07$5.48
-7%
Ships from Manufacturer: • May have applicable lead time

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

$7.94$8.58
-7%
Ships from Manufacturer: • May have applicable lead time

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

$4.74$5.12
-7%
Ships from Manufacturer: • May have applicable lead time

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

$6.35$6.86
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

$9.56$10.32
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

$52.94$57.18
-7%
Ships from Manufacturer: • May have applicable lead time

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Made from...

$9.39$10.14
-7%
Ships from Manufacturer: • May have applicable lead time

Bridge Bolt Tubes for Wilwood GNIII calipers. With a .318” ID, .500” OD and 3.085” length for 1.38” rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance.

$18.44$19.92
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used with D8-4 and D8-6 calipers

$3.14$3.39
-7%
Ships from Manufacturer: • May have applicable lead time

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel...

$4.74$5.12
-7%
Ships from Manufacturer: • May have applicable lead time

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Translation missing: en.general.search.loading